High Flow 600m3/h 1200m3/h 150m 300m Mining Industry Water Submersible Pump
Mining water submersible pump types:
(Notice: flow rate, head meters, voltage and material or other SPECIAL specifications, ODM OEM is acceptable)
| Type | Flow rate | Head meter | Power |
| QK100-240/3-120 | 80 | 300 | 120 |
| QK100-400/5-180 | 100 | 400 | 180 |
| QK100-640/8-300 | 100 | 640 | 300 |
| QK150-320/4-220 | 150 | 320 | 220 |
| QK150-480/6-350 | 125 | 576 | 350 |
| QK150-560/7-410 | 180 | 464 | 410 |
| QK150-640/8-470 | 125 | 768 | 470 |
| QK150-720/9-520 | 150 | 720 | 520 |
| QK150-800/10-600 | 150 | 800 | 600 |
| QK200-200/2-200 | 220 | 175 | 200 |
| QK200-300/3-300 | 220 | 273 | 300 |
| QK200-400/4-410 | 400 | 400 | 410 |
| QK200-500/5-470 | 500 | 500 | 470 |
| QK200-600/6-600 | 200 | 600 | 600 |
| QK200-700/7-600 | 200 | 700 | 600 |
| QK200-800/8-720 | 20 | 728 | 720 |
| QK200-900/9-850 | 200 | 900 | 850 |
| QK200-100/10-1000 | 220 | 910 | 1000 |
| QK300-100/2-140 | 300 | 100 | 140 |
| QK300-800/16-1150 | 300 | 800 | 1150 |
| QK400-200/4-350 | 400 | 200 | 350 |
| QK400-400/8-720 | 400 | 400 | 720 |
| QK560-255/3-620 | 560 | 255 | 620 |
| QK560-340/4-850 | 630 | 303 | 850 |
| QK1120-85/2-420 | 1120 | 85 | 420 |
| QK1120-170/4-850 | 1120 | 170 | 850 |
| QK1120-255/6-1300 | 1400 | 234 | 1300 |
| QK1120-340/8-1700 | 1120 | 340 | 1700 |
| QK1120-425/10-2200 | 1400 | 390 | 2200 |
| QK1120-510/12-2400 | 1120 | 510 | 2400 |
Submersible mine water pump with motor sleeve, explosive proof features. Mine submersible pump with motor sleeve to accelerating motor cooling, cleaning drainage . Filter screen at the bottom of the casing to prevent solid particles from entering the pump body, protecting the pump
Mine industry submersible pump applications:
Widely applied for mining and surface mining to extract coal, gold,copper, tin or diamonds, in offshore, as well as in deep wells to extract water, draining of coal mine central pump station , coal mine flooded disaster emergency drainage or mine drainage.
Mine industry submersible water pump working conditions:
1. Water temperature not higher than 25℃
2. The content of solid matter in water shall not be greater than 0.5% 0 (Note: the content of solid matter in water shall be indicated in the contract so that the manufacturer can choose the shaft extension sealing method.)
3. The water velocity on the surface of the motor shall not be less than 0.5m/so. The motor shell is provided with an anti seawater coating. Pay attention not to scratch the coating when going into the seawater. The motor can work in the seawater for up to 3 months at a time. After the work expires, the motor must be lifted out of the seawater, and the coating must be carefully checked for falling off and damage. If any, the coating shall be brushed after being cleaned and decontaminated with clean water, The corrosion of the zinc plate at the motor base shall be checked, and it shall be replaced in time before it is put into the sea.
(1). Coating material: type B epoxy coal asphalt primer (the first coat)
(2). Type B epoxy coal tar pitch enamel (2nd coat)
4. The pump suction port is 2 meters below the water surface.
5. The rotation direction of the pump is clockwise when viewed from the coupling end to the pump.
Product Tags:
|
|
High Volume 500m3/h 1400m3/h Horizontal Mining Industry Water Submersible Pump Images
|
